Skip to Content

7 Reasons Why Your Traeger Auger Is Binding

A Traeger auger is a type of screw-like device that is used to move material or objects through a confined space. Augers are often used in construction and farming applications to drill holes or move soil and grain.

Traeger augers are also used in some snowplow designs to help clear snow from driveways and sidewalks.

A Traeger auger is a device used to move wood pellets from the hopper to the firepot in a Traeger grill.

The auger is powered by an electric motor and turns a screw that pushes the pellets through a tube to the firepot.

If your Traeger auger is binding, it’s likely due to a clog in the auger tube.

To clear the clog, simply remove the auger from the grill and clean it out with a brush. Be sure to also clean out the auger housing before reassembling the grill.


How to fix auger on Traeger

Several common problems can occur with auger motors.

The most common problem is that the motor can become overloaded and overheat.

This can cause the motor to shut down or even catch fire.

Other problems that can occur include the auger becoming jammed or the blades becoming dull. In addition, the motor can also simply wear out over time and needs to be replaced.

If your Traeger pellet grill is having trouble with the auger, there are a few things you can do to try and fix it.

First, check the auger tube to see if there is any debris blocking it.

If so, remove the debris and clean out the tube. To remove the auger tube, first, unscrew the cap at the top of the tube.

Then, use a long, slender object (such as a chopstick or skewer) to reach down into the tube and dislodge any debris that may be stuck inside.

Finally, rinse out the tube with water and screw the cap back on.

Next, check the auger motor to see if it is working properly. The auger motor is located in the hopper of a Traeger.

To locate the auger motor in a Traeger, you will need to remove the grill grates and drip pan.

Then, locate the screws that hold the heat shield in place and remove them. After the heat shield is removed, you will be able to see the auger motor.

There are a few things you can look for to tell if an auger motor is not working properly.

One thing to look for is whether or not the auger turns when the motor is turned on. If the auger does not turn, then there may be an issue with the motor itself. Another thing to check is whether or not the auger can move freely when the motor is turned on.

If the auger is stuck or jammed, then this could also be a sign that the motor is not working properly.

Finally, you should also listen to any strange noises coming from the motor.

If you hear any grinding or squealing noises, then this could indicate that the motor is having difficulty operating.


Traeger auger not turning

Various parts can cause a Traeger auger to turn. The most common part is the drive shaft.

The driveshaft is what turns the auger when the motor is running. If the drive shaft is not turning, then the auger will not turn.

Another part that can cause the auger to turn is the gearbox. The gearbox is what controls the speed of the auger.

If the gearbox is not working correctly, then the auger will not turn. Finally, the motor itself can cause the auger to turn. If the motor is not running, then the auger will not turn.

There are a few things that could cause your Traeger auger to stop turning.

First, check the auger tube to see if there is any debris blocking it. If so, remove the debris and clean out the tube. Next, check the auger motor to see if it is working properly. If not, try replacing the motor.

Finally, if all else fails, you may need to replace the entire auger assembly.


Traeger auger keeps jamming

If your Traeger auger keeps jamming, it’s likely due to a clog in the auger tube.

To clear the clog, simply remove the auger from the grill and clean it out with a brush. Be sure to also clean out the auger housing before reassembling the grill.


Traeger auger stops after a few minutes

If your Traeger auger stops after a few minutes, it’s likely due to the motor overheating.

To fix this, simply let the grill cool down for a few minutes before restarting it. If the problem persists, try replacing the auger motor.


What to do if an auger is stuck in a Traeger

If an auger is stuck in a Traeger, the first thing you should do is turn off the grill and disconnect it from the power source.

Next, use a brush to clean out any debris that may be blocking the auger. Finally, try restarting the grill. If the problem persists, you may need to replace the entire auger assembly.


Is it normal to have an auger stuck in a Traeger

It is not normal to have an auger be stuck in a Traeger, but it is not entirely uncommon.

When there are a lot of moving parts with any piece of machinery in which heat is involved, problems can arise.

Luckily, if your auger is stuck, it’s most likely due to something small, like a clog or debris blocking it.


Final thoughts

Traeger augers are designed to help you evenly distribute your wood pellets when you are cooking with a Traeger pellet grill.

By evenly distributing the pellets, you can achieve consistent results with your food.

The auger also allows you to easily add more pellets to the fire if needed. However, the Traeger auger can sometimes become jammed.

If the auger becomes bound or jammed, it will not be able to turn and feed pellets into the firepot.

This can be caused by several things, such as debris in the auger housing, or pellets that are too large for the auger.

If your auger becomes bound, you will need to clear the obstruction and restart the motor.