We strive to provide you with authoritative, trustworthy, and expert advice. In doing so, the staff at bbqdropout.com performs extensive research, editing, and fact checking to every post on this webiste. If you feel that this article can improve, please feel free to reach us at staff@bbqdropout.com
Before continuing this article, I wanted to let you know that I have a YouTube channel where I showcase all sorts of video content related to BBQ. Subscribing would mean a lot to me, and I very much appreicate all the support!
The igniter on a Traeger is a small metal rod that is used to light the burner.
The igniter is located inside the burner tube and is connected to the gas line.
When the igniter is turned on, it produces a spark that ignites the gas in the burner tube.
You should push the igniter for about 10 seconds to start your Traeger.
If your Traeger does not have an igniter, you can use a match to light the burner.
Just insert the match through the hole in the side of the burner tube and hold it there until the gas ignites.
Be careful not to burn yourself!
You can also use a lighter to light the burner.
Just insert the lighter into the hole in the side of the burner tube and hold it there until the gas ignites.
Again, be careful not to burn yourself!
Once the burner is lit, you can turn on the Traeger by pushing the power button.
The igniter will click as it lights the burner. The burner should be a bright blue color when it is lit.
You can find more information about lighting the burner in the Traeger instruction manual.
If you still can’t get the burner to light, you may need to call a qualified technician for assistance.
Why does Traeger take so long to ignite?
Traeger grills are designed to take a bit longer to ignite than other types of grills.
This is because they use a convection heating system, which means that the heat needs to circulate the food before it starts cooking.
It can take up to 10 minutes for a Traeger grill to reach cooking temperature, so be patient!
Once the grill is lit, you can turn on the fan to speed up the heating process.
You can also preheat your grill by turning on all the burners and setting them high for 10 minutes before cooking.
This will help your food cook faster and more evenly.
So, in short, it takes a bit of time to ignite a Traeger grill, but it is well worth the wait!
The food that you cook on a Traeger will be juicy, flavorful, and evenly cooked every time.
Why isn’t my Traeger igniting?
There are a few reasons why your Traeger might not be igniting.
First, make sure that the gas valve is open and that there is enough propane in the tank.
If you’re using a Traeger grill, you can tell if there’s propane in your tank by checking the fuel gauge on the control panel.
The needle should point to “Full” if there’s propane in your tank.
There are a few ways to tell if there is propane in a Traeger tank with a defective needle:
1. Check the gauge on the side of the tank. If it is above the “empty” line, then there is still propane in the tank.
2. Weigh the tank. A full tank of propane will weigh more than an empty one.
3. Use a handheld propane detector to check for the presence of propane. These are available at most hardware stores.
4. If you have another gas grill, try connecting the Traeger tank to it and seeing if it lights. If it does, then there is still propane in the tank.
You can also check the grill’s flame; if it’s burning blue, that means there’s propane in your tank.
If the flame is orange or yellow, that means you’re running low on propane.
You may also need to clean the igniter if it is dirty.
If your Traeger’s igniter is dirty, it may not light properly.
To clean it, remove the igniter from the grill and use a stiff brush to remove any debris.
To remove the igniter on a Traeger, first, disconnect the power to the unit.
Then, using a Phillips head screwdriver, remove the two screws that hold the igniter in place.
Gently pull the igniter out of the hole and disconnect the wires.
Finally, replace the igniter and reattach the screws.
You can also use a Q-tip or toothpick to get into hard-to-reach areas.
If the igniter still does not produce a spark, or if the spark is weak, you may need to replace the igniter.
How do I know if my Traeger is igniting?
If you see a bright blue flame coming from the burner tube, then your Traeger is igniting.
You can also tell if the igniter is working by listening for a clicking sound when you turn on the power button.
If you don’t see a flame or hear a clicking sound, then the igniter may not be working properly.
You can try lighting the burner with a match to see if it will light.
If it does, then you know that the igniter is not the problem.
Final thoughts
There is nothing quite like being able to cook your food, and a Traeger grill gives you that ability.
Whether you are grilling steaks, burgers, chicken, or veggies, you can do it all with a Traeger.
Not only does this type of grill give you great-tasting food, but it also provides you with an experience that is hard to beat.
When you own a Traeger grill, you are the one in charge of the cooking process, which means you can customize your meals to perfection.
Now that you know how to ignite a Traeger grill, you can start cooking some delicious food! So, what are you waiting for? Get grilling!
Robert is a certified Pitmaster, with over a decade of experience in smoking the best meats you’ll ever feast upon. He also has a Bachelor of Business Administration from the University of Texas at San Antonio. When he’s not researching technical topics, he’s most likely barbecuing in his backyard.